INFINITI QX30 Recalls
Search for recalls by car
Make selection is required
NHTSA safety recall results (6)
Recall information provided by National Highway Traffic Safety Administration
Steering
2021-06-01
21V419000
Nissan North America, Inc. (Nissan) is recalling certain 2017 Infiniti QX30 vehicles. The steering shaft bore hole for the universal joint bearing may allow excessive movement that, over time, could result in the separation of the bearing and universal joint.
A separated universal joint bearing can cause a loss of steering control and increase the risk of a crash.
Dealers will replace the lower steering shaft, free of charge. Owner notification letters were mailed on July 30, 2021. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's number for this recall is PG1CF.
View details Hide details
Back over prevention: sensing system: camera
2019-09-11
19V654000
Nissan North America, Inc. (Nissan) is recalling certain 2018-2019 Nissan Altima, Armada, Frontier, Kicks, Leaf, Maxima, Murano, NV, NV200, Pathfinder, Rogue, Rogue Sport, Sentra, Titan, Titan Diesel, Versa Note and Versa Sedan vehicles, as well as Infiniti Q50, Q60, QX30 and QX80 vehicles. Additionally included are 2019 Nissan GT-R and Taxi and Infiniti QX50, QX60, Q70, Q70L vehicles. The back-up camera and display settings can be adjusted such that the rear view image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
The lack of an image in the back-up camera display increases the risk of a crash.
Nissan will notify owners in phases, having dealers update the back-up camera settings software, free of charge. The recall began November 11, 2019 and all affected VINs should be activated. Owners may contact Nissan customer service at 1-800-867-7669 or INFINITI customer service at 1-800-662-6200.
View details Hide details
Seat belts: Front: Anchorage
2018-05-29
18V355000
Nissan North America, Inc. (Nissan) is recalling certain 2018 Infiniti QX30 vehicles. The bolt securing the right-hand side lower seat belt anchorage may have been incorrectly installed during production. This can result in the lower seat belt anchorage detaching in a crash. As such, these vehicles fail to comply with certain requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages", number 209, "Seat Belt Assemblies, and number 208, "Occupant Crash Protection."
If the lower seat belt anchorage detaches in a crash, it can increase the risk of injury.
Nissan will notify owners, and dealers will weld in a new retaining plate and secure the seat belt anchorage with a new anchor bolt, free of charge. All vehicles were repaired July 17, 2018. Owners may contact Infiniti customer service at 1-800-662-6200.
View details Hide details
Air bags: Frontal
2017-10-31
17V691000
Nissan North America, Inc. (Nissan) is recalling 2017-2018 Infiniti QX30 vehicles. The driver's air bag may unexpectedly deploy due to insufficient grounding of the steering components if an electrostatic discharge occurs and the air bag clockspring is broken.
If the driver air bag inadvertently deploys, it can increase the risk of injury and a crash.
Nissan will notify owners, and dealers will add sufficient grounding to the steering components, free of charge. The recall began March 26, 2018. Owners may contact Infiniti customer service at 1-800-622-6200, option 7.
View details Hide details
Air bags: Side/window
2017-03-05
17V143000
Nissan North America Inc. (Nissan) is recalling certain 2017 Infiniti QX30 vehicles. The affected vehicles have a driver-side curtain air bag inflator initiator that may fail to ignite during a crash, preventing the air bag from deploying.
If the air bag fails to deploy in the event of a crash, it can increase the risk of injury.
Nissan will notify owners, and dealers will replace the driver-side curtain air bag assembly, free of charge. The recall began on May 2, 2017. Owners may contact Infiniti customer Service at 1-800-662-6200.
View details Hide details
Air bags: Frontal: Passenger side: Inflator module
2016-12-27
16V939000
Nissan North America, Inc. (Nissan) is recalling certain 2017 Infiniti QX30 vehicles manufactured August 11, 2016, to September 27, 2016. The affected vehicles have a passenger air bag inflator initiator that may fail to ignite during a crash, preventing the air bag from deploying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
A passenger air bag that fails to deploy in the event of a crash can increase the risk of injury.
Nissan will notify owners, and dealers will replace the passenger air bag assembly, free of charge. The recall began on March 21, 2017. Owners may contact Nissan customer service at 1-800-647-7261.