2013 Ford Fusion Recalls

Ford Motor Company (Ford) is recalling certain model year 2013 Escape vehicles manufactured January 11, 2012, to April 1, 2013, and 2013-2014 Focus ST vehicles manufactured May 03, 2012, to October 14, 2013. Insufficient compression in the engine wiring harness splices to the Manifold Absolute Pressure (MAP) sensor may provide incorrect signals to the powertrain control module (PCM).

Ford Motor Company (Ford) is recalling certain model year 2013-2015 Ford Fusion and Lincoln MKZ vehicles manufactured February 3, 2012, to March 20, 2015, and 2015 Ford Edge vehicles manufactured February 26, 2015, to February 28, 2015, and originally sold, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. In the affected vehicles, snow or water containing road salt or other contaminants may corrode the electric power steering gear motor attachment bolts.

Ford Motor Company (Ford) notified the agency on April 23, 2015, that they are recalling certain model year 2013-2014 Ford Fusion and Lincoln MKZ vehicles manufactured July 1, 2012, to May 31, 2013, and 2012-2014 Fiesta vehicles manufactured February 1, 2012, to May 31, 2013. On April 30, 2015, Ford expanded the recall to cover an additional 119,567 vehicles, including certain model year 2011 Ford Fiestas manufactured from November 11, 2009, to May 31, 2013 and certain model year 2013 Ford Fusion and Lincoln MKZ vehicles manufactured from February 1, 2012, to June 30, 2012. A component within the door latches may break making the doors difficult to latch and/or leading the driver or a passenger to believe a door is securely closed when, in fact, it is not.

Ford Motor Company (Ford) is recalling certain model year 2013-2014 Ford C-Max vehicles manufactured January 19, 2012, to November 21, 2013; Ford Fusion vehicles manufactured February 3, 2012, to August 24, 2013; Ford Escape vehicles manufactured October 5, 2011, to November 1, 2013; and Lincoln MKZ vehicles manufactured April 25, 2012, to September 30, 2013. The coating on portions of the Restraint Control Module (RCM) may crack, and when exposed to humidity, circuits on the printed circuit board may short.

Ford Motor Company (Ford) is recalling certain model year 2013-2014 Ford Fusion and Lincoln MKZ vehicles manufactured August 15, 2012, through September 10, 2013, 2013-2014 Ford Escape vehicles manufactured June 5, 2012, through August 12, 2013, and 2013-2014 Ford C-Max vehicles manufactured from July 23, 2012, through May 28, 2013. The driver and passenger seatback assemblies may have been produced with sub-standard weld joints used to attach the seat back recliner mechanism to the seat frame. The affected seat backs may have insufficient strength to meet the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, "Seating Systems."

Ford is recalling certain model year 2013 Explorer, Taurus, Flex, Fusion, Police Interceptor Sedan and Police Interceptor Utility vehicles; and certain model year 2013 Lincoln MKS, MKT, and MKZ vehicles. In the affected vehicles, the fuel delivery module may develop a crack, allowing fuel to leak.

Ford is recalling certain model year 2013 Fusion vehicles manufactured April 19, 2013, through April 23, 2013. The steering gears may be missing an internal retaining clip. If the clip is missing, components inside the steering gear may become dislodged inside the gear assembly.

Ford is recalling certain 2013 Escape vehicles manufactured from October 5, 2011, through November 26, 2012 equipped with 1.6L engines; and 2013 Fusion vehicles manufactured from February 3, 2012, through November 29, 2012 equipped with 1.6L engines. The engines may overheat leading to fluid leaks that may come in contact with the hot exhaust system.

Ford is recalling certain model year 2013 Fusion vehicles, manufactured from February 3, 2012, through October 20, 2012, for failing to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." The affected vehicles may not have had the low beam headlamp projector coating properly cured during its manufacturing process.