Can You Family in the 2018 Ford Mustang GT?

If you’re concerning yourself with how well car seats fit in a Ford Mustang GT, well, first of all, we salute you for not giving in to the SUV siren’s song that’s resulted a sea of sedans dashed on the rocky shore of the monthly auto sales charts — including every other Ford car besides the Mustang. And, if we may say so, your little one or ones are going to get what we feel is a proper early education on the joys of rapid acceleration. We recently tested the GT’s claim of being able to run a sub-4-second zero-to-60-mph sprint and — wouldn’t ya know it? — the boast proved out. But now you have precious cargo to worry about, and we’re pleased to report that, despite underwhelming scores for past Mustang Car Seat Checks, this one went pretty well for a sporty coupe with a tight backseat and sloping rear roofline. 

How many car seats fit in the second row? Two

Related: More Car Seat Checks

Solid

• None

So-So

• Latch, grade B: Two sets of lower Latch anchors, though well-marked and easy to find, sit an inconvenient 2 inches inside the seat, requiring the installer to push through slits in the rather stiff leather upholstery. Two sets of top tether anchors can be found under hinged plastic covers on top of the rear shelf.

• Infant seat, grade B: The baby seat installed easily, with the skinny, hooklike connectors finding their mark with surprisingly little effort considering the deep positioning of the Latch anchors, and leaving enough legroom for even a 6-foot-1-inch-tall tester to enjoy modest comfort in the car’s front passenger seat.

• Rear-facing convertible, grade B: Our rear-facing convertible seat also installed with relative ease and did not require us to move the Ford Mustang’s passenger seat forward. The seat’s chunky connectors required a little more force to penetrate the slit in the Mustang’s leather upholstery, but nothing Herculean.

• Forward-facing convertible, grade B: The seat also installed easily enough in the forward-facing position and, again, required no fussing with the front passenger seat. The biggest complaint with installing this seat in either position was having to scrunch and contort my body in ways I’m not really built for — but, c’mon, you knew you were putting car seats in a Mustang.

• Booster, grade B: This install was fine and the notably aggressive seat bolstering (somehow) doesn’t interfere too severely with how the booster sits on the Ford Mustang’s seat bottom. Despite the seat belt buckles sitting on stable bases, however, they’re recessed just enough so that kids will have trouble grasping them in order to strap themselves in.

Skip It

• None

Grading Scale

Solid indicates an A grade for optimum ease of use and fit. So-So indicates B or C grades for one to two ease-of-use or fit issues. Skip It indicates D or F grades.

A: Plenty of room for the car seat and the child; doesn’t impact driver or front-passenger legroom. Easy to find and connect to Latch and tether anchors. No fit issues involving head restraint or seat contouring. Easy access to the third row.

B: One room, fit or connection issue. Some problems accessing third row when available.

C: Marginal room plus one fit or connection issue. Difficult to access third row when available.

D: Insufficient room, plus multiple fit or connection issues.

F: Does not fit or is unsafe.

About Cars.com’s Car Seat Checks

Editors Jennifer Geiger, Jennifer Newman and Matt Schmitz are certified child safety seat installation technicians.

For the Car Seat Check, we use a Graco SnugRide Classic Connect 30 infant-safety seat, a Britax Marathon convertible seat and Graco TurboBooster seat. The front seats are adjusted for a 6-foot driver and a shorter passenger. The three child seats are installed in the second row. The booster seat sits behind the driver’s seat, and the infant and convertible seats are installed behind the front passenger seat.

We also install the forward-facing convertible in the second row’s middle seat with the booster and infant seat in the outboard seats to see if three car seats will fit; a child sitting in the booster seat must be able to reach the seat belt buckle. If there’s a third row, we install the booster seat and a forward-facing convertible. Learn more about how we conduct our Car Seat Checks.

Parents should also remember that they can use the Latch system or a seat belt to install a car seat, and that Latch anchors have a weight limit of 65 pounds, including the weight of the child and the weight of the seat itself.

Editor’s note: This article was updated on June 22, 2018, to revise the Car Seat Check scores for our infant, rear-facing convertible and forward-facing convertible seats.

Cars.com’s Editorial department is your source for automotive news and reviews. In line with Cars.com’s long-standing ethics policy, editors and reviewers don’t accept gifts or free trips from automakers. The Editorial department is independent of Cars.com’s advertising, sales and sponsored content departments.